20
3. Disassembly and Reassembly
3-10 Removing and Replacing Oven Door
WARNING
The door is very heavy . Be careful when removing door Do not lift door up by the Handle-Door .
Parts
Explaination Photo
Explaination
Oven door
To remove Oven Door:
1.
Fully open the door
2.
Pull the hinge locks downward(Fig .1)
3.
Firmly grasp both side of the door at the top .
4.
Close door to the door removal position, which is
approximately 5 degrees . (refer to the Fig .2) Lift door up
and out until the hinge arm are clear of the slot .
To replace door:
1.
Firmly grasp both sides of the door at the top position .
2.
With the door at the same angle as the removal position,
slide the indentation of the hinge arm into the bottom
edge of the hinge slot . The notch in the hinge arm must
be fully inserted into the bottom of the slot .
2.
Fully open the door .
(If the door will not fully open, it means that the
indentation is not seated correctly in the bottom edge
of the slot . Push the hinge locks up to the locked
position .)
3.
Close the oven door .
Содержание FCQ321HTUW
Страница 9: ... 2 Specifications 2 3 Accessory Item Description Code No Q ty Rack Flat DG75 01001A 2 ...
Страница 30: ...30 4 Troubleshooting 4 1 Failure Display Codes Safety error ...
Страница 67: ...67 7 Wiring Diagrams 7 1 Wiring Diagrams This Document can not be used without Samsung s authorization ...