Samsung ES1642dc, Руководство пользователя по оборудованию

Страница: 26 / 59

26
Rear Panel LEDs and Buttons
1 Status Green
Orange Off = The system is powered off.
Green = The system is operating normally.
Flashing green = The system is booting.
2 Fan Green
Orange Green = The fan is operating normally.
Orange = Damage/error
Off = Not detecting any fans
3 Connection Status Green
Orange
Green = Normal
Orange = Either of the IN or Out SAS port is disconnected.
Off = One or more of the following conditions exist:
•The expansion unit is not powered on.
•The ES NAS system cannot detect the expansion unit.
4 High Availability LED Green
Orange
Green = Active state
Orange = The Expansion Controller has taken over from
the other Expansion Controller.
Off = One or more of the following conditions exist:
• The Expansion Controller has failed over to the other
one.
• The Expansion Controller is not powered on.
5 Onboard SAS Port
LED Green
Red
Off = No link
Green = Network link
Flashing = Network activity
Red = Error/damage
6 Power-on Button The Power-on button of the Expansion Controller. To shut
down the Expansion Controller, press and hold it for
about 5 seconds. *
7 Reset The Expansion Controller reset button
* The QES does not provide power-on and off function for the expansion units.
Onboard mini-SAS ports
Two onboard mini Serial Attached SCSI (SAS) ports provide direct attachment to the base ES NAS
enclosure with 6Gb/s data transmission (or 12Gb/s depending on the expansion enclosure model)
.
Disk drives and Disk Enclosures
The ES NAS system and the expansion units
The system can accommodate superfast solid-state drives, and traditional spinning disk drives
such as SAS, NL-SAS and SATA drives. (For SATA drives, please order additional SAS-to-SATA
interposer boards.) However, SSDs are the best choice for I/O intensive workload and they can
be used for cache acceleration in QES. Cache configurations are available ranging from 1 drives
up to 16 drives (full-SSD drive set) of the base ES NAS.