Disassembly and Reassembly _ 11
3-4. REMOVING THE 3
RD
RACK
7RUHPRYHWKHXSSHUUDFNIURPWKHVOLGHUDLOSXOOWKHXSSHUUDFNRXWIURPWKHWXEXQWLOLWLVIXOO\H[WHQGHG
Hold down the holder rails on both sides to release the upper rack. Slide the upper rack out to the end of one holder rail,
and then lift it up. Repeat the steps above with the other holder rail.
6WHS3XW\RXU¿QJHURQWKHORZHUDUHDRIWKH
rd
holder rail as shown, and then push the holder handle (see the
arrow marks in this picture) to draw and remove the holder. Repeat this step on the other side.
6WHS:KHQWKHKROGHULVUHPRYHGUHPRYHWKHUGUDFNIURPWKHGLVKZDVKHU
Step 3. Reinsertion of the holder is the reverse order of disassembly.
Caution
Make sure the hook-shaped part circled faces downward when reinserting the holder into the rail.
Step 1.
Step 2.
Step 3.