installing the dishwasher
_11
02 INS
T
ALLING THE DISHW
ASHER
STEP 5
UNPACKING AND INSPECTING THE DISHWASHER
Unpack the dishwasher in an open area free of obstruction both around the packaging and overhead. We
recommend that you retain all of the packing materials until the dishwasher is fully installed and operational
to ensure you have removed all the product’s components from the packing materials prior to disposal.
Unpacking
1.
Position the carton right-side-up with top arrows pointing
upwards.
2.
Unbuckle or cut the straps securing the packaging.
3.
Unpack the product packaging with care.
4.
Put the straps and all of the packing materials from around
the dishwasher inspecting them for any signs of damage.
5.
Locate and set aside the dishwasher's kick plate. The Kick
plate is attached to packing material of the dishwasher.
6.
Lift the dishwasher from the packing tray, and then place it
on the fl oor.
ALWAYS LIFT THE DISHWASHER TO MOVE IT. Sliding
it over rough surfaces can damage the dishwasher’s feet
and sliding the feet over fi nished surfaces can, in some
cases, damage that fi nish or the underlying surface.
Use caution, and do not grab the upper air duct when
moving the dishwasher.
7.
There is also packing inside the dishwasher that you may want to leave in place until the
dishwasher is installed.
8. DO
NOT
, under any circumstances, remove the sound-absorbent padding that surrounds
the exterior of the tub of the dishwasher.
Inspecting
Mechanical
1.
Check the plastic base assembly to ensure that it is intact
2.
Check the dishwasher’s feet to ensure they are in place and can be adjusted so you can level
and secure the dishwasher.
3.
Check all the visible components on the bottom of the dishwasher to ensure they are intact
and secure.
4.
Check the door latch, the operation of the hinges, and confi rm the door is properly secured
to the dishwasher.
Kick plate
CAUTION
CAUTION
DW9900M-00183A-01_EN.indd Sec3:11
DW9900M-00183A-01_EN.indd Sec3:11
1/2/2017 12:41:08 PM
1/2/2017 12:41:08 PM