English - 12
Touch controls
Touch controls allow you to operate the dishwasher easily.
•
They are convenient to operate, requiring only a soft touch.
•
Have a simple and stylish design.
•
Are easy to clean.
If you have children or you want to clean the Control Interface, we recommend activating
the Control Lock feature to lock the control buttons. See page 8.
-
Children will not be able to accidently start the dishwasher by touching the controls with
this option selected.
-
If a cycle is running, the buttons will not respond. (except the
Power
button)
-
If dishwasher is off, only the
Power
button responds.
using your dishwasher
DW7000KM-02025
01_EN.indd Sec4:12
DW7000KM-02025D-01_EN.indd Sec4:12
2016-05-18 10:47:24
201 -0 -0 10:47:24
Changing the “AutoRelease™ Dry” setting can infl uence drying results. Select “
A1
” mode
for better drying results. (“A1” is the default setting.)
After a cycle is complete, the door automatically opens to let steam out. This is normal and
not a product malfunction.
TM
Auto Release
TM
Auto Release is designed to improve the drying performance , which opens the door (5 to
15 minutes before a cycle is complete)in between 15 seconds and 3 minutes after the actuating
signal is triggered, You can change the default settings as follows:
TM
Auto Release On/Off
Using Setting Mode
To enter Setting mode, press the Delay Start+Sanitize button for 3 seconds while the
dishwasher is on.
Press the Sanitize button until"A1" or "A0" is displayed,"A0" disables Auto
TM
TM
Release Dry.
"A1" enables Auto Release Dry. Select "A1" for better drying results.
Using Toggle keys
Press the Lower+Hi-Temp Wash
button for 3 seconds to enable or disable
TM
Auto Release Dry.
TM
"A0"disables Auto Release Dry.
TM
"A1"activates Auto Release Dry.
Once the door opens in the
TM
Auto Release Dry mode, the door
cannot be closed manually for the next 2
minutes.
TM
The Auto Release Dry mode will be
disabled for the Rinse Only cyvle.
Press the Delay Start button implement your choice.
•
•
•
•
•
•
Setting Mode
The Setting Mode lets you change the dishwasher’s
Sound
,
Light indicator
, and
AutoRelease™
Dry
settings. To enter the Setting mode, press the
Delay Start
+
Sanitize
buttons for 3
seconds while the dishwasher is on. Press the
Sanitize
button to select a sub-setting menu and
then press the
Delay Start
button to change a setting.
•
9 5 1