English - 10
8
Dry+ / Child Lock
Use this option when you want to dry your dishes more completely.
The temperature rises to 162 ˚F (72 ˚C) in the fi nal rinse cycle and dry time is
increased.
If you select the this option, electricity consumption is increased.
The next time you use the dishwasher, the
Dry+
option will be selected
automatically and applied to the next cycle. You can turn off the
Dry+
option
by pressing the
Dry+
button.
You cannot select the
Dry+
option if you select the Delicate cycle.
*
Child Lock
: This option allows you to lock the buttons on the control panel -
except the
Power
button - so children cannot accidently start the dishwasher
by pressing the buttons on the panel. Only the
Power
button remains active.
To lock or unlock
the buttons on the control panel, press and hold the
Dry+/Child Lock
button for three (3) seconds.
-
When the Power is On : Press and hold the
"
Dry+/Child Lock
"
button for
three (3) seconds.
-
When the Power is Off : Push the
Power
button fi rst, and then press and
hold the
"
Dry+/Child Lock
"
button for three (3) seconds.
-
Child Lock remains active until you turn it off. You cannot select cycles or
options or start the dishwasher when Child Lock is on.
9
Display
Displays cycle time and remaining hours and minutes, Delay Start hours, and
Error messages.
If an error occurs during an operation, an error message is displayed with a
warning sound.
Refer to the information codes page.
Child Lock indicator
-
Turns on if the Child Lock is set (or the dishwasher is in the standby or
pause modes).
-
Turns off while the dishwasher is operating.
-
When Child Lock is on, the Child Lock indicator blinks for several
seconds if any button except the Power button is pressed.
Self Clean indicator
-
Turns on when the Self Clean option is enabled (or the dishwasher is
in the standby or pause modes), but turns off while the dishwasher is
operating.
-
Blinks for 5 seconds every 20 to 22 cycles.
-
The cycle counter disappears when the Self Clean operation is complete
or when the dishwasher reaches the 23rd cycle without the Self Clean
cycle being used. (The Reset or Self Clean operation is not counted by
the cycle counter.)
Rinse Refi ll indicator
-
Turns on if the dishwasher runs out of rinse aid (or the dishwasher is in
the standby or pause modes).
-
Turns off while the dishwasher is operating.
using your dishwasher
DW80H9950-00149A-01_EN.indd 10
DW80H9950-00149A-01_EN.indd 10
2014-03-11
5:26:57
2014-03-11
5:26:57
