12 _ Disassembly and Reassembly
Part
Figure
Description
CASE BRAKE/
CAP CASE
BRAKE/
GASKET
BRAKE
(DW60A8050*/
DW60A8040*
models)
4. Take off the left SIDE PANEL.
WARNING
Do not this work without safety gloves. It can
cause injury from sharp edge.
5. Take off the CAP CASE BRAKE by rotating to
counter-clockwise direction with long-nose pliers.
- CAP CASE BRAKE : DD81-02725A
CAUTION
It can be broken easily when you use the iron part
of the pliers. Take off the cap using the handle part
of the pliers to prevent damage.
Gasket brake
Cap Case brake
Gasket brake
6. Remove the GASKET BRAKE from the CASE
BRAKE assembly.
- GASKET-BRAKE : DD81-02726A
[ASSEMBLY]
1. Fit the GASKET BRAKE on the CASE BRAKE,
and fasten the CAP CASE BRAKE by rotating in a
clockwise direction with long-nose pliers.
CAUTION
It can be break easily when you use the iron part
of the pliers. Take off the cap using the handle part
of the pliers to prevent damage.
CAUTION
Pay attention to assemble the seal correctly.
It can cause the water leakage when it’s
assembled wrong.
2. Assemble the left SIDE PANEL with the screws.
CAUTION
Fasten the screws that was assembled to origin
location. Don’t assemble to other locations.
WARNING
Do not this work without safety gloves. It can
cause injury from sharp edge.