Using the detergent and water softener
_19
02
USING THE DETERGENT AND W
A
TER SOFTENER
ADJUSTING THE AMOUNT OF RINSE AID
You can adjust the amount of rinse aid by following the sequence below. A better drying performance is
achieved by setting the higher number.
1.
Switch on the dishwasher.
2.
Press the
Express
(Built-in model) or
Program
(Free Standing model) button for fi ve seconds, within 60
seconds from turning on the dishwasher.(same as the Softener setting mode)
3.
Press the
Delay start
button to enter the Rinse aid setting mode.
4.
The LCD shows the present rinse level. (between d1~d5)
5.
Press the
Express
(Built-in model) or
Program
(Free Standing model) button to select the amount of
rinse aid you want. the sets will change in the following sequence; d1
d2
d3
d4
d5
d1.
(The default level is d4.)
6.
Select the amount of rinse aid and wait 5 seconds to complete the setup.
HOW TO USE THE MULTI TAB OPTION
Your dishwasher has a Multi tab option which does not require salt and rinse aid but a 3 In1 tablet.
The Multi tab setting is only for use with Multi tab tablets. If using Multi tab tablet without this option,
the appliance will not get its best performance.
1.
Put the Multi tab tablet into the container then start the Multi tab
option.
2.
Close the lid and press until it locks in place.
When using Multi tab compact combination detergents ensure
that the lid can be closed correctly.
ATTENTION
: Keep all detergents in a safe place out of
children’s reach. Always add the detergent in the dispenser just
before starting the dishwasher.
DW5500M_DD81-02437Q-00_EN.indd 19
DW5500M_DD81-02437Q-00_EN.indd 19
2019-06-25 11:13:19
2019-06-25 11:13:19