Installing your dishwasher
_39
07 INS
T
ALLING Y
OUR DISHW
ASHER
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.04-1.0 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C. Otherwise,
the product may malfunction.
• Use a rated power of 220-240 V~, 50 Hz.
• Install the product while the power cord is removed.
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
-
An 220-240 V~, 50 Hz fuse or circuit breaker.
-
An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
STEP 3. PREPARING THE CUSTOM PANEL
(FOR FULLY BUILT IN AND SEMI BUILT IN DISHWASHER)
The custom panel should be processed in accordance with the illustrated dimensions.
A
A
A
A-A
589
38
436
30
720 (MAX)
20(MAX)
2-Ø 5.5
2-Ø 2( 8)
4-Ø 2( 8)
8-Ø 2( 8)
2-Ø 11
517
474.8
127
566±0.2
451±0.2
540±0.2
75±0.2
62
ف
18
6-8
8-9.5
1.5
6-C1.5
1.5
566
589
36
220
115.5
20
220
570 (MAX)
397
202
7
6-Ø 1
8-Ø 2
20
Fully built in
Semi built in
CAUTION
WARNING
DW5500MM_DW6KM5031BB_EG_DD81-02615L-00_EN.indd 39
DW5500MM_DW6KM5031BB_EG_DD81-02615L-00_EN.indd 39
2019-11-08 5:29:53
2019-11-08 5:29:53
