Samsung DW60M5010FS, Руководство пользователя

Страница: 140 / 180

Prior using for the first time
Before using your dishwasher for the first time:
A. Set the water softener
B. Loading the salt into the softener
C. Fill the rinse aid dispenser
D. Fill in detergent
Set the water softener
The water softener is designed to remove minerals and salts from the water, which would have a detrimental
harder the water is. The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1.
Find out about the hardness value of your tap water. Your water utility company will help you
with this.
2. Set value can be found in the water hardness table.
3. Close the door.
4. Switch on "Power" switch.
5. Hold down "Delay" button and then press "Program" button (for freestanding dishwasher) or
"Start" button (for full built-in dishwasher) for 5 seconds. The buzzer rings one time and H.
fl ashes on the digital display. (factory setting is H4)
To change the setting:
1. Press "Delay" button.
Water hardness adjusting scheme ( DW60M5060FS/DW60M5060FW/DW60M5060BB/
DW60M5040FS/DW60M5040FW/DW60M5040BB )
Each time the button is pressed, the set value increases by one level; when the value of H7
2. Press "Program" or "Start" button. The chosen setting has now been stored.
Contact your local water board for information on the hardness of your water supply.
Water hardness table
WATER HARDNESS
mmol/l Value setting
°Clark Range
0 H 1 . 1 ~ 0 t f o s 8 ~ 0
1 H 4 . 1 ~ 2 . 1 t f o s 0 1 ~ 9
2 H 8 . 1 ~ 5 . 1 m u i d e m 2 1 ~ 1 1
3 H 1 . 2 ~ 9 . 1 m u i d e m 5 1 ~ 3 1
4 H 9 . 2 ~ 2 . 2 m u i d e m 0 2 ~ 6 1
5 H 7 . 3 ~ 0 . 3 d r a h 6 2 ~ 1 2
27~38
hard 3.8~5.4 H6
7 H 9 . 8 ~ 5 . 5 d r a h 2 6 ~ 9 3
DW4000KM-00000A-00_EN (Basic)_160323.indd 17
140_ Prior Using for the First Time