Installing your dishwasher
_19
03 INS
T
ALLING
STEP 7. COMPLETING THE INSTALLATION
1.
Open the door and remove all foam, paper packaging, and unnecessary parts.
2.
Turn on the circuit breaker you turned off before you began the installation.
3.
Open the water supply valve to supply water to the dishwasher.
4.
Turn on the dishwasher, and then select and run a cycle.
Check if the power turns on correctly and if there is any water leakage while the dishwasher is
operating.
Make sure to check for water leakage on both ends of the water supply line and drain hose
connector.
5.
To install the kick plate, refer to the fi gure below.
1) Install the ‘Felt Lower’ onto the inside of the
‘Kick Plate’.
2) Models that are not equipped with the adjustable leg
3) Models that are equipped with the adjustable leg
Assemble the bracket in the right direction and order as shown in the fi gure.
CAUTION
7
7
5
5
4
8
small
Big
Big
Small
Install over 96.5mm
small
Big
Big
Small
Install over
96.5mm
BU-Install_DD68-00160B-07_EN.indd 19
BU-Install_DD68-00160B-07_EN.indd 19
2017-02-08 1:28:48
2017-02-08 1:28:48
Содержание DW60H9950 Series
Страница 117: ...Bemærk BU Install_DD68 00160B 07_DA indd 21 BU Install_DD68 00160B 07_DA indd 21 2017 02 08 1 27 58 2017 02 08 1 27 58 ...
Страница 118: ...Bemærk BU Install_DD68 00160B 07_DA indd 22 BU Install_DD68 00160B 07_DA indd 22 2017 02 08 1 27 59 2017 02 08 1 27 59 ...
Страница 119: ...Bemærk BU Install_DD68 00160B 07_DA indd 23 BU Install_DD68 00160B 07_DA indd 23 2017 02 08 1 27 59 2017 02 08 1 27 59 ...