English
21
Ins
tallation
STEP 5
Install the custom panel
Ø2
~8
1.
Put the installation template on the
back of the custom panel and fix it
temporarily using transparent tape. Note
that the rear of the custom panel will be
attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 2 kg and
5 kg.
2.
Mark 6 points guided on the installation
template.
A
B
A
B
3.
Remove the installation template, and
then tighten the
custom panel fixers (A)
with
2 screws (B, Ø3.5 X 25)
as shown in
the figure.
D
C
4.
Tighten the
door bracket (C)
with
8 screws (D, Ø4 X 14)
as shown in the
figure.
DW4000RM(A5)_IB_DD81-02709B-05_EN.indd 21
2021-04-06 3:51:24