Samsung DVM, Руководство по установке

Страница: 33 / 48

33
SET
TING
Step 3. Procedure of option setting
After option setting is complete, press the [Mode] button to check whether the setting value
is correct or not.
→ → → →
→ → → →
Step 4. Inputting an option
Press [Power] button twice consecutively to remote controller receiver to finish the setting.
Try more than two times to make sure that option is set.
Step 5. Check for operation
1
Check automatic reset when entering FCU KIT option, and check if it operates normally
using wired remote controller.
2
Reset the power of FCU interface module after setting address. Unplug the V1, V2
connectors connected to FCU interface module and plug them again.