R
ec
or
ding
English - 61
Recording Mode (VCR)
AUTO
: Select when you want to set video quality automatically.
It depends on remaining time on the VCR tape.
SP
: Standard Play, for best picture quality.
LP
: Long Play, for maximum recording time (2 times SP).
When you are recording at EP mode on a DVD-RW(V mode)/-R disc,
it may not record the full 6 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system. For example, if you
record a programme with a lot of action,
it uses a higher bit rate which in turn consumes more disc memory.
DVB-T Timer recording is possible only on AUTO mode.
On DVB-T recording, recording mode will be automatically
determined depending on the quality of the video (or audio).
PDC
: PDC (Programme Delivery Control) function.
- If you set this function on, you can control the starting and
ending time of recording by special signal included in the
broadcasting signal. If a TV programme is shortened or starts
earlier or later than scheduled, this function synchronizes the
starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV
schedule. Otherwise the timer recording will not operate.
- Do not select PDC unless you are sure the programme you wish
to record is broadcast with PDC.
5.
After selecting the set up value for each mode, press the
OK
button to
save the timer record.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of
the fi rst programme is complete, the second programme starts being
recorded.
To exit without saving the current setting
Press
the
EXIT ( )
button.
To return to the previous menu
Press
the
RETURN
button if you don’t want to set a timer recording.
6.
Turn the power off to fi nish the Timer Recording setting.
•
will appear on the front panel. It means that a timer recording is
registered.
Timer Recording will not work when the power is on.
The timer recording time may diff er from the set time depending
on disc status and overall timer recording status (for example,
recording times overlapping, or when the previous recording ends
within 2 minutes before the start time of the next recording.)
You can make the Timer Recording up to 12 programmes.
M
•
M
01436A-VR350M-XEU-ENG-53~91.indd61 61
01436A-VR350M-XEU-ENG-53~91.indd61 61
2007-09-14 오후 3:14:12
2007-09-14 오후 3:14:12
