Samsung DVD-V940K, Руководство по обучению

Страница: 101 / 164

Circuit Operating Descriptions
7-43
B. SEARCH Mode :
Search mode : Fine seek,(Moving the tracking actuator slightly little below 255 track) and coarse search, moving
much in use of sled motor. The coarse search will be described in sled linked servo and now, the fine seek is
explained shortly.
If the object lens is located near target, cut off the tracking loop and give the control signal as many as desired
count to move the tracking actuator via U1 pin 175 terminal(STRACK).
3) SLED LINKED SERVO
• Normal play mode
Move SLED motor slightly by means of DA signal in U1 pin 174, as the tracking actuator moves along with
track during play. Control to move the entire Pick-up as the tracking actuator moves.
• Coarse serach mode
In case of long-distance search (such as chapter serach), U1 uses MIRR and signal of U146.
Then, read ID and compute the existing track count after input of next track.
If the existing track count is within fine seek range, tracking begins using fine seek.
4) CLV SERVO(DISC MOTOR CONTROL SERVO)
Input RF signal (from Pick-up) to SIC1 pin 154, 155
Detect SYNC signal from RF inU1, and output PWM signal toU1 pin 171 for constant linear velocity.