ENG-
21
C
O N N E C T I O N S
Y
ou must have the antenna/cable
connected for the Auto Clock to set
Connecting a Power Cord & Auto Setup
1
Y
our DVD-VCR's power cord should be plugged
into a standard 120V/60Hz wall outlet. Avoid
pressing any buttons on the remote control or on
the unit during Auto Setup. While your DVD-VCR
is running Auto Setup, “Auto” will blink. When
Auto Setup is complete, the current time will be
displayed on the front panel. If Auto Setup fails to
locate a channel to set the clock, you should set
the clock manually. (See pages 24 to 25.)
2
T
urn on the power by pressing the
POWER
button on the remote control or on the front
panel.
3
T
urn on your TV by pressing the
POWER
button
on the TV remote control.
4
Press the input selector on your
TV remote until
the signal from the DVD-VCR appears.
01623A_V6800_XAC_Eng1 3/28/08 4:18 PM Page 21