GB
13
GB
12
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control when
you:
◆
Purchase the DVD-VCR
◆
Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
Do not mix different battery types (manganese and
alkaline for example).
You must set the date and time when:
◆
You purchase the DVD-VCR
☛
◆
Do not forget to reset the time when you change clocks
from winter to summer time and vice versa.
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding
,
or , buttons to select the
CLOCK
option.
3
Press the ENTER button to select this option.
Result:
The
CLOCK SET
menu is displayed.
4
Press
or
to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the
or
buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
➢
You can hold the
or
buttons down to scroll more
quickly through the values.
6
On completion, press RETURN to exit the menu.
RETURN
CLOCK SET
12:00 1/JAN/2002
TUE
MAIN MENU
CLOCK SET
RETURN
ENTER
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆
The DVD will go into Play mode and the VCR will go into Record
mode.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆
You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛
For NTSC DVD or VCD copy
◆
Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP (see page 34).
◆
If Quasi PAL is On, the copy process can not active.
◆
The copy is only active PAL tape system.
1
2
3
4
4
1
00046G DVD-V52/XSS-GB1 11/9/02 12:44 PM Page 12
