English - 17
C
onnec
ting & S
etting Up
Connecting the DVD Recorder
This section involves various methods of connecting the
DVD Recorder to other external components and
required initial setting modes.
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television.
Connect the RF cable as shown.
Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
Plug the other end into the appropriate connector on
the television.
Plug in the DVD Recorder and TV
Turn on the DVD Recorder and TV.
Press the
INPUT SEL.
button on your TV remote
control until the Video signal from the DVD Recorder
appears on the TV screen.
The RF cable connection of this product sends
only signals of TV. You must connect SCART cable
or Audio/Video cables to watch output from your
DVD Recorder.
1.
2.
3.
4.
5.
6.
M
Additional connections
You can connect your DVD Recorder to a External device
(VCR/Satellite receiver).
- DVD mode
Connect the AV2 connector of DVD Recorder and
External device (VCR/Satellite receiver) using a SCART
cable.
Connect the AV1 connector to the SCART AV
connector on TV.
Turn on the DVD Recorder, External device (VCR/
Satellite receiver) and TV.
Set Input mode on AV2.
- TV mode
Press the
TV/DVD
button on remote control, then
“TV” appear on Front LED display. (or turn off DVD
Recorder.)
You can watch programmes from a satellite or digital
tuner connected to this DVD Recorder, even when the
DVD Recorder is turned off .
1.
2.
3.
4.
1.
2.
Connecting & Setting Up
1
3
2
To RF IN
To TV
RF Cable
To ANT INPUT
External device (VCR/Satellite receiver)
01452A-SR150M-XEU-ENG-1~22.indd 17
01452A-SR150M-XEU-ENG-1~22.indd 17
2007-06-25 오후 1:42:54
2007-06-25 오후 1:42:54