R
ec
or
ding
English - 75
When you are recording at EP mode on a DVD-RW(V mode)/-R disc,
it may not record the full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system. For example, if you
record a programme with a lot of action,
it uses a higher bit rate which in turn consumes more disc memory.
DVB-T Timer recording is possible only on FR mode.
On DVB-T recording, recording mode will be automatically
determined depending on the quality of the video (or audio).
PDC
: PDC(Programme Delivery Control) function.
- If you set this function on, you can control the starting and
ending time of recording by special signal included in the
broadcasting signal. If a TV programme is shortened or starts
earlier or later than scheduled, this function synchronizes the
starting and ending time of recording with the actual
broadcasting time automatically.
- Set up the start-time EXACTLY according to the published TV
schedule. Otherwise the timer recording will not operate.
- Do not select PDC unless you are sure the programme you wish
to record is broadcast with PDC.
TITLE
: To label the title name, press the
RED(A)
button.
Title renaming screen appears.
Follow steps 4 and 5 of “Renaming (Labeling) a Title” on page 81.
5.
After selecting the set up value for each mode, press the
OK
button to
select
Save
.
will appear on the front panel. It means that a timer recording is
registered.
If the timer settings overlap;
The programmes are recorded in order of priority. After recording of
the fi rst programme is complete, the second programme starts being
recorded.
To exit without saving the current setting
Press
the
EXIT ( )
button.
To return to the previous menu
Press
the
RETURN
button if you don’t want to set a timer recording.
6.
When you want to recording on DVD-RAM/-RW/-R, you must insert the
disc.
7.
Turn the power off to fi nish the Timer Recording setting.
Timer Recording will not work when the power is on.
The timer recording time may diff er from the set time depending
on disc status and overall timer recording status (for example,
recording times overlapping, or when the previous recording ends
within 2 minutes before the start time of the next recording.)
You can make the Timer Recording up to 12 programmes.
If HDD disk has no available recording space,
blinks. It means
that HDD disk has no space to record.
If you have set the Timer Recording using PDC, the fan can still
operate and make a noise when the power is off .
M
•
•
•
M
01364A-SH853M-XEU-ENG-64~110.ind75 75
01364A-SH853M-XEU-ENG-64~110.ind75 75
2007-06-22 오전 10:51:58
2007-06-22 오전 10:51:58
