Samsung DVD-CM350, Инструкция по эксплуатации

Страница: 37 / 43

GB
69
GB
68
Speaker Volume Control
AUX Audio Setting
1 H/PHONE Volume Control
• You can adjust the volume by connecting the H/PHONE to the
H/PHONE JACK on the front panel.
• The volume can be adjusted from level 31, and the AMP SPEAKER
will be muted.
• The LINE OUT AUDIO will be output continuously while the
H/PHONE is connected.
2 AMP SPEAKER Control
• Connect the speaker to the speaker jack on the rear.
• The volume can be adjusted from level 20.
• When you turn the power ON, if the last volume level was over
20, the volume will be set to 20, and if it was under 20, the
volume will be set to that level.
1 Press “SETUP” button
With the DVD in stop mode, press the SETUP button.
2 Select “Options”
Using the œ , ❷ and
➛
,
❿
buttons, move the selection cursor
to “USER SET”, then press ENTER to select.
3 Select “AUX Audio”
Move the selection arrow to “AUX AUDIO”, then press right to
select from the following options.
• RCA - Analog Audio input
• OPTICAL - Digital Audio input
➢
Optical(Digital Audio Input) is available for PCM and
Dolby Digital only.
MAIN MENU
USER SET
RETURN
œ❷
➛❿
ENTER
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF
:OFF
SHOWVIEW EXTEND :OFF
AUX AUDIO :RCA
RETURN œ❷
➛❿
RCA
OPTICAL
Connect the front, center, and surround speakers and the
subwoofer to the speaker terminals on the back of the main unit.
1
Connect the speakers to the speaker output terminals on the back
of the main unit, matching the colors.
Caution
Do not set the Speakers (except center speaker) near the TV or Monitor
because the Speakers (except center speaker) are not magnetic shielded.
Connecting the Speakers
Center Speaker
Front Speaker (L)
Subwoofer
(for LFE)
Surround
Speaker (R) Surround
Speaker (L)
Front Speaker (R)