operating Instructions, tips
_25
DRYING RACK (OPTIONAL PART)
Installing and using the drying rack
1.
Open the Dryer door.
2.
Position the drying rack in the tumbler, placing the front lip of the drying rack on top of the lint
fi lter.
3.
Place the rear legs in the two recessed areas of the dryer’s back wall, and then push down
the middle of the drying rack to fi x.
4.
Place the items to be dried on the rack, leaving space between them so air can circulate.
5.
Close the Dryer door.
6.
Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
SUGGESTED TEMP. SETTINGS
Washable sweaters
(block to shape and lay fl at on rack)
Low or Extra Low
Stuffed toys
(cotton or polyester fi berfi lled)
Low or Extra Low
Stuffed toys
(foam or rubber-fi lled)
Air Fluff
Foam rubber pillows
Air Fluff
Sneakers
Air Fluff or Heat (Extra Low)
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
create a fi re hazard.
The Drying Rack is not supplied with this model. The Drying Rack is optional. You can
purchase it through a service center. (Part code : DC61-01522A)
02 operating Instructions, tips
WARNING
DV231AEW-03064A_EN.indd Sec5:25
DV231AEW-03064A_EN.indd Sec5:25
2011-04-11 2:38:06
2011-04-11 2:38:06