Engl
ish
Troubleshooting
English
46
Information codes
If the dryer fails to operate, you may see an information code on the screen. Check the table below and try
the suggestions.
Information
code
Meaning
Action
tC
Air temperature sensor issue
Clean the lint filter and/or heat exchanger filter. If
this continues, call for service.
tC5
Compressor temperature sensor
issue
Wait 2-3 minutes. Turn the power on and restart.
dC
Running the dryer with door open
Close the door and restart.
If this continues, call for service.
HC
Compressor overheat
Call for service.
9C2
Low voltage detected
Check if the power cord is plugged in. If this
continues, call for service.
5C
Water tank full
Drain pump is out of order
Empty the water tank, turn the power on, and
restart. If this continues, call for service.
nC
Filter issue
Check if the filter is assembled correctly. If this
continues, call for service.
nC2
Inner cover of the heat exchanger
issue
Check if the inner cover of the heat exchanger
is assembled correctly. If this continues, call for
service.
If any information code keeps appearing on the screen, contact a local Samsung service center.
DV8700TK_DV16T8520BV_DC68-04223D-00_EN.indd 46
2021/1/12 10:20:39