Samsung DTB-D700F, Руководство по обслуживанию

Страница: 9 / 57

2-6
Samsung Electronics
Operating Instructions
DTB-D700F
GB-21
/ DVD PL
A
YER
GB
2. OPERA
TING THE RECEIVER
Main Menu
After installing your antenna system and DTB-D700F with appropriate connectors.
●
Plug in the
AC main power and switch on the receiver
.
●
Press the MENU key to bring up the main menu.
The following on screen display will appear: The sub menu topics will be displayed. For the sub-menus Installation, Channel Organising and Parental Lock you need the PIN Code.
2.1. Installation
This menu consists of 3 sub-menus: Manual Scanning,
Auto Scanning and Reset to Factory Default.
●
Select “Installation” in the main menu mode to select the sub menu.
●
Enter the PIN Code.
If you have not entered your own PIN Code then the PIN Code 0000 applies, which was set at the factory
.
2.1.1 Manual Scanning To
tune-in new channels and weak signals, the DTB-D700F has
been provided with the option “Manual Scanning” where the channel data can be entered by the user
.
After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed:
●
Select the channel which you want to find.
●
Input the frequency of the channel you want to find.
●
Select the bandwidth. Y
ou can select the value of 6, 7 or 8 MHz.
●
Select the FFT
(Fast Fourier
T
ransform) Mode.
Y
ou can select the value of 2K or 8K.
●
After select option, press the OK key to start the scanning process.
DTB-D700F
GB-20
DTT RECEIVER
8. T
eletext OSD
When the current broadcasting program provides
T
eletext OSD,
press the
TEXT
key twice to see the current
T
eletext OSD list.
To
change the
T
eletext OSD:
●
Use the
/
keys to select a
T
eletext OSD you want.
●
Press the O
K
key and then the
T
eletext OSD you want is
displayed on the screen.
9. T
eletext VBI
When the current broadcasting program provides T
eletext VBI, press the
TEXT
key three times to see the
current
T
eletext VBI list.
To
change the
T
e
letext VBI:
●
Use the
/
keys to select a
T
eletext VBI you want.
●
Press the O
K
key and then the
T
eletext VBI you want is
displayed on the screen.
NN
oo
ttee
:
A
television with
TV functions supported shall be used.
The system shall operate with the subtitle turned of
f.
10. Audio
Mode
Y
ou can choose a mode among left, right or stereo using the
AUDIO
key
.
To
change the audio mode:
●
Press the AUDIO
key to select the left, right or stereo.
●
Press the EXIT
key to save and escape from this menu.
BASIC FUNCTIONS (DTT)