Samsung DSB-S305G, Инструкция по эксплуатации

Страница: 31 / 35

GB-21
DSB-S305G
GB
GB-20 D I G I T A L S A T E L L I T E R E C E I V E R
DSB-S305G
2.5 Reset to Factory Defaults
This is to recover the Factory set values in case the user has
encountered some problems after changing any values of
channel data and others which may be in error.
The screen display will be as follows:
At the request window, if you press OK key, the receiver will be
reset to factory default settings automatically. Then First Installation
Procedure will start. Press
EXIT to cancel.
N No otte e : This cause your previous settings to be deleted!
All settings and information including channel data will
be deleted.
2.6 Home Transponder Sett.
This is to set new settings for Home Transponders which are
used for downloading network services list.
Input the Frequency, Poliarity, Symbol Rate and FEC using
/ or numeric keys.
● Select Home Transponder you want to set.
You can select the value of 1, 2 or 3.
● Input the Frequency of the transponder you want to find.
● Input the Polarity of the transponder you want to find.
You can select the value of Horizontal, Vertical, Circular Left
or Circular Right.
●
Input the Symbol Rate of the transponder you want to find.
●
Select FEC (Forward Error Correction) of the transponder
you want to find.
You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto.
● Press OK key to confirm your selection.
OPERATING THE RECEIVER OPERATING THE RECEIVER
3. System Setup
This option enables you to change the factory preset
system settings as per your requirements.
3.1 Language Selection
The “ Language Selection ” option allows the user to select
the desired language of the OSD, Soundtrack, Teletext VBI,
or EPG. However, these languages for Soundtrack, Teletext VBI
and EPG depend on broadcasting.
For example, even the language for Subtitle can be selected,
it may not be supported because of no Subtitle on the program.
●
For user convenience, 7 different languages are available in
OSD menu.
●
To select the desired language menu, press / keys to
change language and press OK .
● The OSD Language, Soundtrack, Teletext, or EPG will vary
according to the selected language.
MF68-00374A_GB 10/21/05 2:32 PM Page 20