Samsung DSB-3800, Инструкция по эксплуатации

Страница: 12 / 19

DSR 3800, DSR 3700
20 D I G I T A L S A T E L L I T E R E C E I V E R
DSR 3800, DSR 3700
21
1.4 Auto Scanning
The sub menu “ Auto Scanning ” will enable download
the channels automatically from the preprogrammed satellites.
To download channels automatically:
You can select All/Off/Only Free option mode in
each satellite.
Off : No Scan
All : Scan all the channels
Only Free : Scan free channels
● Press key.
Auto Scanning menu will be displayed.
All the channels in the list from the selected satellite will be
automatically downloaded.
After scanning you will see "
Your digital receiver found... " .
Afterwards you return to Auto Scanning menu.
1.5 Manual Scanning
To tune-in new channels and weak signals, the DSR 3800, DSR 3700 has been provided
with the option "
Manual Scanning " where the channel data can be entered by the user.
After selecting the " 5. Manual Scanning " from the Installation Menu,
the following screen will be displayed:
●
Select the target satellite for manual search.
● Load a transponder.
This option will enable the user to load any
transponder from the preprogrammed list
available within the receiver.
N No otte e : When you enter Frequency after setting
Load TR to New, the entered information
must include at least one channel to make
channel save possible.
● Input the frequency of the transponder
you want to find.
● Input the symbol rate of the transponder
you want to find.
1.2.2 Installer Mode
After checking the positioner’s state, installer should use
this menu. He should set the “
Disable Limits ” before
using User mode.
●
Select the Drive Motor West/East and use the /
keys to drive motor.
key drives to west and key drives to east.
●
Select “ Enable Limit ”, in order to enable “ Set Limit ”.
● Select “ Disable Limit ”, in order to disable “ Set Limit ”.
● Select “ Reset Positioner ” and key to reset positioner.
1.3 Solarsat Setting
This menu is only for the Solarsat antenna.
When you press this menu, you will get this message,
“
This menu is only for the Solarsat antenna.
If you have one-press OK, otherwise-press EXIT .”
You can set the value according to your location.
● To set the Value of Date and Time, use the /
keys to change the value.
● Use the / keys to change position.
●
Use the / keys to move each filed.
OPERATING THE RECEIVER OPERATING THE RECEIVER
DSR3800_3700_6.28 7/8/02 11:59 AM Page 20