Samsung DIGIMAX V4, Инструкция по эксплуатации

Страница: 51 / 90

53
Shooting
INFORMATION
The continuous and AEB shot cannot be selected in the TIFF image quality.
If the number of available shots remaining is under 2 pages, the continuous shot Is not
activated as the minimum number of the continuous shots are 2. In the AEB shot, the
number of available shots remaining have to be over 3 page.
It is easy to be the camera shaking in the AEB shot and it takes a lot of time to store the AEB
image.We recommend using a tripod.
Even though the camera is restarted, the language setting is maintained.
You can select the camera’s sensitivity to light by selecting the ISO sub menu.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
1. Rotate the mode dial to the RECORDING mode and press the MENU button.
2. Press the DOWN and the cursor will be shifted to the main menu.
3. Select [SHOOTING] menu by pressing the UP/DOWN button.
4. Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.
5. Select [ISO] menu by pressing the UP/DOWN button.
Press the OK button to confirm the setting.
Press the menu button twice and the menu display will be disappeared. Take a picture.
6. Press the RIGHT button and the cursor will shift to the [ISO] sub
menu. Select the desired sub menu by pressing the UP/DOWN
button.
- AUTO : The camera's sensitivity is automatically
changed by variables such as lighting value
or subject brightness.
- 100/ 200/ 400 : In the same lighting condition, the higher
ISO value is, the faster the shutter speed will
be. However, the images can be saturated
with the high brightness condition.
INFORMATION
The higher the number, the more sensitive it is to light. As with film, the higher speeds usually induce more
electronic noise so the image gets grainier.
Even though the camera is restarted, the ISO setting is maintained.
ISO
EXIT : MENU
PORTRAIT SETUP MyCAM
PAGE :
SIZE
QUALITY
METERING
SHOOTING
L 2272X1753
FINE
MULTI
SINGLE