Samsung DIGIMAX 202 Скачать руководство пользователя | Manualshive

Страница: 99 / 100

background image

99

FAQ

Win XP

: Trace [Start

Control Panel

Performance and

Maintenance

System

Hardware Device Manager

Universal Serial Bus controller].

There must be USB Host Controller and USB root hub under [Universal serial
bus controller].
In addition, double-click on the USB Universal Host Controller and the USB
Root Hub to check if the Device Status states "This device is working properly".
If the Device Status says the device is "not working properly", click the "Driver"
tab and then click [Update Driver] or [Reinstall Driver].
When all the conditions mentioned above are met, the computer can support
the USB interface.

[Case 7]

When using the USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.

[Case 8]

Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.

[Case 9]

When I open the Device Manager (by clicking Start

(Settings)

Control

Panel

(Performance and Maintenance)

System

(Hardware)

Device

Manager), there are Unknown Devices or Other Devices entries with a
yellow question mark(?) beside them or devices with an exclamation mark(!)
beside them.
Right-click on the entry with the question(?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again. For Windows 98
PC, remove the camera driver also, restart the PC, and then reinstall the
camera driver.
Double-click on the entry with the question(?) or exclamation(!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location where the appropriate driver for the device is,
specify the "C:/Windows/inf" or "C:/Windows/inf/other" folder (where C: is the
drive letter of the hard disk where the operating system is installed).

«
...
97
98
99
100
»

Содержание DIGIMAX 202





































































































Отзывы:

Нет отзывов

Похожие инструкции для DIGIMAX 202

Бренд: Samsung Страницы: 25

Бренд: LANCERTECH Страницы: 9

Бренд: ViewSonic Страницы: 1

Rolera Bolt CMOS

Бренд: Q Imaging Страницы: 17

Бренд: ViewSonic Страницы: 2

Бренд: Z3 Technology Страницы: 6

Бренд: Teq Avit Страницы: 16

Vantage LBC7051

Бренд: Lorex Страницы: 2

Бренд: Urive Страницы: 60

Бренд: Planet Страницы: 90

Бренд: myGEKOgear Страницы: 26

Бренд: A-rival Страницы: 24

Бренд: Axis Страницы: 55

Бренд: Sankyo Страницы: 30

Бренд: Panasonic Страницы: 45

LUMIX DMC-FZ1000B9

Бренд: Panasonic Страницы: 367

Бренд: Minolta Страницы: 44

Бренд: Mamiya Страницы: 49

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды