E-
8
Wired Remote Controller-Buttons and Display
To use the wired remote controller, refer to an appropriate manual.
The
button is for your installation specialist. You must NOT press it.
After cleaning the air filter, press the
button. Then the wired remote controller will display the
FILTER SIGN indicator when the time to clean the air filter; refer to page 13.
Duct type air conditioner does not have function of adjusting air flow direction.
Therefore, the function is not operated even if you press the
button.
The heat mode( ) is not selected in cooling only models.
Note
Mode selection button
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Timer button
Timer set/cancel button
Test button
Temperature adjustment
buttons
Removing frost indicator
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Filter Reset button
Swing button
(Not operated)
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off button
Fan speed
adjustment button
On/Off indicator
DB98-26846A_E.indd 8
2007-3-19 18:29:50
