E-
10
Function Controller
The function controller is an optional accessory and it is installed on the wall.
The function controller is an additional controller which is used with the centralized controller.
To use the function controller, refer to an appropriate manual.
Mode selection button
Room number display
Test indicator
Indoor unit selection button
Test button
Temperature adjustment
buttons
Filter Reset button
Swing button
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer Set/
Cancel button
Fan speed adjustment
button
On/Off indicator
Centralized controller indicator
Communication error indicator
Removing frost indicator
Operating mode
Note
The
button is for your installation specialist. You must NOT press it.
After cleaning the air filter, press the
button. Then the wired remote controller will display the
FILTER SIGN indicator when the time to clean the air filter; refer to page 13.
Duct type air conditioner does not have function of adjusting air flow direction.
Therefore, the function is not operated even if you press the
button.
The heat mode( ) is not selected in cooling only models.
DB98-26846A_E.indd 10
2007-3-19 18:29:53
