Samsung DF60 8 G Series, Руководство пользователя

Страница: 41 / 256

Engl
ish
English 41
3. Use a brush and running water to clean the lint filter.
Completely dry the lint filter in a shaded area.
4. Reinsert the lint filter, and then close the cover.
Lamp (Light source)
This product contains a light source of energy efficiency class <G>.
The lamp(s) and/or control gear(s) are not user-serviceable. To replace the lamp(s) and/or control gear(s)
in the product, contact a local Samsung service centre. For detailed instructions on replacing lamp(s) or
control gear(s) in your product, visit the Samsung website (http://www.samsung.com), go to
Support >
Support home , and then enter the model name.
For detailed instructions on dismantling lamp(s) and/or control gear(s), simply follow the replacement
instruction reached as described above.
Descaling
Using the steam function causes limestone accumulation and deposition throughout the internal water
circulation system due to calcium contents of water. To prevent this, perform descaling regularly to
increase the performance and lengthen the lifespan of the product. If you do not perform descaling
immediately after getting the notification message, some functions may be restricted for use and may
cause performance decrease or even shortens the lifespan of the product.
1. When the Descaling Required. Check the manual message appears on the display, remove all items
from the product and then tap and hold Drying and Delay End for 3 seconds.
2. Empty the Refill Tank and the Drain Tank.
3. Dilute a descaling agent with water as recommended by the manufacturer of a descaling agent.
4. Fill the Refill Tank with the diluted descaling agent up to the MAX line.
- The maximum capacity of the Refill Tank is 1.4 litre.
5. Tap and hold to start descaling.
- If the Empty the Drain tank message appears on the display during descaling, empty the Drain Tank.
6. When the Check the Refill & Drain tanks message appears on the display, empty both the Refill Tank
and the Drain Tank, and then rinse them thoroughly.
7. Fill the Refill Tank with clean water up to the MAX line, and then insert the Refill Tank and the Drain
Tank. Tap .
8. When descaling is complete, empty the Drain Tank and fill the Refill Tank with water.
- You can use AIRDRESSER once you finish all these steps.
Untitled-6 41 2022-05-16 9:53:52