Samsung
System Administration Guide
DCS
-
408 & 408i November 2001
13
Program Station Names
[MMC 104]
You can assign a name or identification to each internal extension, up to 11 characters
long. The procedure for entering names is described below.
You can toggle characters between upper and lower case using the ‘A’ key. The ‘A’
key is programmable key #19 on a 24B keyset, or key #7 on a 12B keyset, or key #1
on a 6B keyset. (Refer to your
Samsung DCS
Keyset User Guide
for more informa-
tion.) By default, characters are displayed in upper case. If you press the ‘A’ key, the
next character you select will display in lower case. Press ‘A’ again to return to upper
case, and so on. It is, therefore, possible to have a combination of upper and lower
case characters within a name.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
‘A’ - Used to toggle upper and lower case.
ACTION
DISPLAY
1. Open customer programming and select
104
2. Dial station number (e.g.,
22
)
OR
Press
UP
or
DOWN
to select the station and press the right
soft key to move the cursor
3. Enter the station name using the procedure described below
(e.g. Sam Smith) and press the right soft key to return to step 2
If you make a mistake, either press
HOLD
to clear the entire
entry or use the
DOWN
key to move the cursor back
4. Press
TRSF
to store and exit programming
OR
Press
SPEAKER
to store and advance to next MMC
[21] S T N N A M E
[22] S T N N A M E
Sam Smith
[22] S T N N A M E
_
