16_
setting up
GETTING READY TO INSTALL THE
REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
Selecting the best location for the
refrigerator
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator
doors to open easily.
• A location that allows sufficient space to the
right, left, back and top for air circulation.
• A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
If the refrigerator does not have enough space, the
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.
When you install the refrigerator next to a fixed wall,
you need a minimum clearance of 95 mm between
the refrigerator and wall to allow the door to swing
open.
First thing! Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung French Door Refrigerator.
• Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the refrigerator where the
temperature will go below 10 ºC.
• Do not locate the refrigerator where it may
become wet.
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above
the floor). Refer to ‘Adjusting the Level’ in
the manual (on page 15).
CAUTION
Setting up your French Door
Refrigerator
Flat-blade
screwdriver(-)
Control Lever
758 mm
1234 mm
1194 mm
950 mm
889 mm
36 mm
34 mm
752 mm
1410 mm
1171 mm
387 mm
104 mm
543 mm
1697 mm
1535 mm
770 mm
1007 mm
625 mm
16 mm
76 mm
50 mm
50 mm
80 mm
DA68-02787A (EN)-05.indd 16
2017. 8. 9. �� 10:51
