ENGLISH
65
65
Advanced Recording
✤
The AUDIO DUBBING function only works in PLAYER Mode.
✤
You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤
Use the internal and external microphones or other audio equipment.
✤
The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■
When you wish to dub using the External A/V input, connect the
Multi-AV cable to the camcorder by inserting the Multi-AV cable into the
Multi-AV Jack at the rear of the camcorder.
(VP-D323i/D325i/D327i only)
-
Press the MENU button, move the MENU SELECTOR to highlight A/V and
push the MENU SELECTOR.
-
Move the MENU SELECTOR to highlight AV IN/OUT and push the MENU
SELECTOR to select AV IN.
2. Press the
(PLAY/STILL) button and find the timeframe of the scene to
be dubbed.
3. Press the
(PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state for dubbing.
5. Press the
(PLAY/STILL) button to start dubbing.
■
Press the
(STOP) button to stop the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write protected video tape.
■
When you wish to dub using the External A/V input, you must connect the Multi-AV cable to the audio system from which you
wish to record. (VP-D323i/D325i/D327i only)
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
(VP-D323i/D325i/D327i only)
AV IN
Audio (L)Audio (R)
00778F VP-D323(i) UK (62~109) 5/10/04 9:23 AM Page 65
