Samsung CTR464NB01 Series, Руководство пользователя

Страница: 13 / 20

English 13
Hob use
Switching the appliance off
To completely switch off the appliance, use
the “
On / Off ” control sensor.
Touch the “ On / Off ” sensor.
NOTE
• After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an (for “hot”).
• If the heat setting is at and you want to turn the burner off, the sensor
can be touched one additional time, and the heat setting will go to zero.
• For faster adjustment, keep your finger on the or sensor until the
required value is obtained.
• If more than one sensor is pressed for longer than 10 seconds, will show
in the heat setting display. To reset, touch the “
On / Off ” sensor.
Switching a cooking zone off
To switch off a cooking zone, return the
setting to by using the control panel’s
heat setting and touch sensors
or .
Switching the appliance on
1. Touch the “ Lock ” sensor for
approximately 3 seconds.
2. The appliance is switched on using the
“
On / Off ” control sensor. Touch the
“ On / Off ” sensor.
• The digital displays will show .
NOTE
After the “ On / Off ” sensor has been actuated to switch on your appliance, a
heat setting must be selected within approximately 10 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
Temperature control
For setting and adjusting the power
level ( to ) for cooking, touch the
corresponding cooking zone’s
, keys.
The first time is pressed, the heat level is
set to .
The first time
is pressed, the heat level is
set to .
Use the
key to increase the heat setting
and the key to decrease.
CTR464NB01P_FA_DG68-00963A-00_EN.indd 13 2017-04-16 7:42:27