- 7 -
3-3 Operation Guide (Continued)
Using the Defrost Feature
NOTE
: When the oven was operating for longer than 25 min under Defrosting cycle, you
can NOT change the power level from Defrosting to Heating(Cooking/Reheating)
mode.
NOTE
: The oven is designed not to work when power level is set to ‘0’ mode between
the heating mode and the defrosting mode.
* Use only containers that are microwave-safe.
1. Open the door.
2. Place the frozen food in the centre of the plate tray.
3. Close the door.
4. Press the Defrost selector pad to set DEFROST HIGH ( ) or DEFROST LOW ( ) as
you wish.
Result
: The selected DEFROST indicator appears in the display.
5. Press the Number pads to set the defrosting time. (Max. 50 min)
6. Press button.
Result
: Defrosting begins.
NOTE
: It is not possible to set a defrosting time for longer than 50min. The defrost indi-
cator will flash and it is advisable to press CANCEL and enter a new defrost level
and time.
Repeat Feature
You can repeat the previous cooking setting (regardless of manual or automatic memory heating) by pressing
the START button. The oven starts with exactly the same heating time and power level that were used in the last
operation.
NOTE
: Repeat feature does not support for +20sec pad. The repeat feature will be
cancelled once the power source is cut off.
Using +20sec Pad
This is a ONE TOUCH COOK pad.
By touching the +20sec pad once, you can start heating instantly.
You can increase the cooking time by pressing the +20sec pad while heating is being done.
A cooking time increases by 20 seconds at each press on +20sec pad. But it can not exceed the maximum time.
Like traditional cooking, you may find that, depending on the food’s characteristics or your tastes, you have to
adjust the cooking times slightly.
Before operating the oven, times can be increased/decreased using either the time pads or +20sec button.
During the operating, time may only be added by using the +20sec button.
