3-3 Operation Guide (CM1929/CM1629/CM1329)
Using the Defrost Feature
NOTE : When the oven was operating for longer than 25 min under Defrosting cycle, you can NOT
change the power level from Defrosting to Heating(Cooking/Reheating) mode.
NOTE : The oven is designed not to work when power level is set to
0
mode between the heating
mode and the defrosting mode.
* Use only containers that are microwave-safe.
1. Open the door.
2. Place the frozen food in the centre of the plate tray.
3. Close the door.
4. Press the Defrost selector pad to set DEFROST HIGH (
) or DEFROST LOW (
) as you wish.
Result : The selected DEFROST indicator appears in the display.
5. Press the Number pads to set the defrosting time. (Max. 50 min)
6. Press
button.
Result : Defrosting begins.
NOTE : It is not possible to set a defrosting time for longer than 50min. The defrost indicator will flash
and it is advisable to press CANCEL and enter a new defrost level and time.
Repeat Feature
You can repeat the previous cooking setting (regardless of manual or automatic memory heating) by
pressing the START button. The oven starts with exactly the same heating time and power level that
were used in the last operation.
NOTE : Repeat feature does not support for +20sec pad.
The repeat feature will be cancelled once the
power source is cut off.
Using +20sec Pad
This is a ONE TOUCH COOK pad.
By touching the +20sec pad once, you can start heating instantly.
You can increase the cooking time by pressing the +20sec pad while heating is being done.
A cooking time increases by 20 seconds at each press on +20sec pad. But it can not exceed the
maximum time.
Like traditional cooking, you may find that, depending on the food
s characteristics or
your tastes, you have to adjust the cooking times slightly.
Before operating the oven, times can be increased/decreased using either the time pads or +20sec
button.
During the operating, time may only be added by using the +20sec button.
