3-3 Operation Guide (CM1929/CM1629/CM1329)
One-stage cooking
This oven is preset at the factory for automatic operation.
Make sure the oven is plugged into a properly earthed electrical outlet and ’ON’ appears in the display window.
Open the door (The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and then close the door securely (The
oven lamp will go off.).
1. Select the desired power level by pressing the Power Level Selector pad.
Result : The selected power level will be displayed in the display window.
2. Set the desired heating time by pressing the NUMBER pads.
Result : The selected time is displayed in the display window.
* The maximum time according to each cooking power level can be referred to in the title
Power Levels ans
Time Variations
. The NUMBER pads will not operate or respond when you press a cooking time exceeding
the maximum value. It is not possible to set a cooking time for longer than the maximum time allowed on the
chosen program. It is advisable to press CANCEL and to enter a new power level and
cooking time.
3. Press
button:
Result : The oven lamp and cooling fan will be turned on. Heating will start.
The time on digital display will count down.
* When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop.
The oven lamp will go off. For1min,thedisplay shows
0
and the cooling fan will keep working in order to
cool down the interior parts. During the time, the fan will not stop even when you open the door. 1 min later it
will stop. Food may be removed from oven whilst the fan is still running.
4. Open the door and take the food out.
Close the door. The oven lamp will go off.
* Whilst in a heating cycle, one press on
pad stops the oven. At this time, the Power Check Indicator
ON
starts blinking and goes off when the
pad or
button is pressed again.
You can restart it by pressing the
button or a second press on
pad will cancel the selected program.
While NOT in a heating cycle, one tap on
pad cancels the selected program.
You can press +20sec pad one or more times in order to add the cooking time by 20 seconds. But you can
not exceed the maximum time per power level allowed for power level selected.
* When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display
window.
* When heating cycle is completed and you open the door, the oven lamp automatically turns on and goes off
1 min later.
* When you open the door whilst in a heating cycle, the oven stops operating and the oven lamp automatically
turns on for 1 min and goes off 1 min later. If you leave the oven door open for more than 1 min, the oven
beeps once every minute and after 5 min the power source check indicator
ON
appears in the display
window.
