Samsung CLX-9250ND, Руководство по обслуживанию

Страница: 283 / 549

4.Servic
• Diagnostics > Adjustment > Scan Area Adjus
Purpose To correct image position and m
function is used when a result o
expectation.
Operation 1 Choose one item from the Operation
Procedure 1. Choose one item from the
• Image Position - Le
• Image Position - Si
• Magnification - Vert
2. Select one item and press t
3. Change the adjustment valu
4. Image Position (
ⓐ
,
ⓑ
) : If t
press “+”. Otherwise, press
5 Magnification (
ⓒ
) : If the cu 5. Magnification (
ⓒ
) : If the cu
“-”. Otherwise, press “+”.
6. Press the “OK” button to ap
Example
Cases
ⓐ
= 11.0 mm
* Note that value of magnificati
ⓑ
= 9.0 mm
ⓒ
= 191.7 mm
ⓒ
= 188.1 mm
size, 420mm ((190mm + 10mm
Verification 1. Scan the Scanner A/S Cha
from the scan glass.
2. To check the image positio
the chart to the copy.
3. To check the magnification,
copy .
Specification
ⓐ
,
ⓑ
: 10 ,
±
1.5mm
ⓒ
: 190 ,
±
1.5mm
Image Position Unit: mm, Scale
Magnification Unit: %, Scale: 0.
Reference Figure 5-3
Service Manual
CLX-9250/9350 series
4-3
ce Mode
stment > Manual Adjustment
magnification of scanned images manually. This
of automatic adjustment does not satisfy the
e table There are three items to choose e table. There are three items to choose.
eading Edge
de Edge
tical Direction
the “Edit” button.
ue with arrow button.
the current value is smaller than the specification,
s “-”.
urrent value is smaller than the specification press urrent value is smaller than the specification, press
pply the new value to the system.
Leading
Edge
Side
Edge
Vertical Direction
Adjustment
-10
on adjustment needs to be calculated based on A3
+10
+0.8% (-3.4mm)
-0.4% (near +1.8mm)
m*2)*2) if the used Scanner A/S Chart is A4 size.
rt and send it to a PC. Scanning must be occur
on, compare the position of scale marks (
ⓐ
,
ⓑ
) of
, compare the length of line
ⓒ
of the chart to the
e: 0.1, Min/Max: -6/+6
1(0.42mm), Min/Max: 99/101
SAMSUNG ELECTRONICS
34