manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Руководство по обслуживанию

Поделиться
Скачать
Samsung CLP 510N - Color Laser Printer Скачать руководство пользователя страница 148

8-25

Samsung Electronics

Troubleshooting

Service Manual

Replace Toner [Color]

It occurs when the Toner Cartridge of indicated Color is not installed.

*If the Toner Cartridge does not be installed
*The value of OEM Resistor be recognized by the value of opened due to the contamination of Contact point.

1. Open the Deve Cover and then check if the Toner Cartridge is installed.
2. Check if the contact point is contaminated.
3. Replace the Toner Cartridge.
4. Replace the OEM PBA, HVPS and Main PBA in order.

Tray2 Error

This occurs when Tray2 is not installed correctly.

Turn the printer off and re-install Tray2.

Tray2 Jam Cover Open

The cover on Tray 2 is open.

Check and ensure that the cover of Tray2 is closed properly.

Waste Toner Full/Not Install

Waste Toner Tank is full or not installed.

1. Check and replace the Waste Toner Tank or install it correctly.
2. Check that the Waste Toner Sensor actuator lever is free and not damaged or distorted.
3. Check the condition of the waste toner sensor cable harness and refit or replace if it is damaged.

Содержание CLP 510N - Color Laser Printer





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды