manualshive.com logo in svg

Samsung CLP 510N - Color Laser Printer, Руководство по обслуживанию

Поделиться
Скачать
Samsung CLP 510N - Color Laser Printer Скачать руководство пользователя страница 147

8-24

Troubleshooting

Samsung Electronics

Service Manual

Press Cont Key 
Replace T2 Roller

The T2 roller is coming to the end of its usable life and will need 
replacing soon.

* Press the [On-Line/Continue] button to continue printing.
* Replace the T2 roller when the image quality becomes unacceptable.
* You can select if this message will be displayed on the LCD Pane or not.

Ready IP Conflict

IP address conflict with the address of another device on the network.

This only occurs when the optional network interface is connected and configured for TCP/IP support. Change the IP
Address.

Ready [CMYK] Low Toner

The indicated Toner Color cartridge is almost empty.

Replace the indicated Color Toner Cartridge.
To temporarily improve printing for a short time remove the indicated toner cartridge and rock it gently from side to side
for a short time before replacing it.

Replace Drum Cartridge

This occurs when the OPC drum is not correctly installed.

1. Check that the OPC Unit is installed and locked correctly.
2. Check the OPC OEM Harness to the Main PBA.

--> Refit or replace the harness if it is damaged.

3. Replace the Main PBA.

Replace Image Transfer

There is a problem with the ITB Unit installation.

* This occurs when the ITB Unit is not correctly installed and locked
* This occurs when the value of the OEM Resistor in the ITB Unit is incorrectly detected due to contamination of the

contact.

1. Open the Top Cover and then check that the ITB Unit is installed and locked correctly.
2. Clean the contacts on the ITB Unit
3. Replace the ITB unit.

Содержание CLP 510N - Color Laser Printer





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды