manualshive.com logo in svg

Samsung CLP-310N, Руководство по обслуживанию, Страница: 57 / 172

Поделиться
Скачать
Samsung CLP-310N Скачать руководство пользователя страница 57

Alignment & Troubleshooting

Service Manual

4-3

Samsung Electronics

4.1.2.2 LED Function

There are five LEDs present. Status led indicate the error/online status of the printer in idle mode. In error 
mode, the status LED glows by red color and in ready mode, it glows by green color. The other four LEDs 
indicate the toner status. If the black toner needs to change, the toner-low (black) LED glows and if the color 
(yellow, magenta, cyan) toners need to change, the toner-low (yellow, magenta, cyan) LED glows.

4.1.2.2.1 Functions

LED function is made up of
- Ready/Printing status display
- Error status display
- Toner low status display

4.1.2.2.2 Detail Description

LED control order
1) Control LED according to current printer state
    : After the panel task is received each event, the LED operation is controlled by current printer status.

2) Write LED value to GOP (General Output Port)

Содержание CLP-310N













































































































































































Отзывы:

Нет отзывов