manualshive.com logo in svg

Samsung CLP-310N, Руководство по обслуживанию, Страница: 102 / 172

Поделиться
Скачать
Samsung CLP-310N Скачать руководство пользователя страница 102

Alignment & Troubleshooting

Service Manual

4-48

Samsung Electronics

4.2.5 Common Windows Problems

NOTE:  

Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User’s Guide that came with your PC 
for further information on Windows error messages.

"File in Use" message appears 

during installation.

Exit all software applications. Remove all 
software from the StartUp Group, then 
restart Windows. Reinstall the printer driver.

"Error Writing to LPTx" 

message appears.

 Ensure that all cables are connected 
 correctly and the printer is on.
 If bi-directional communication is not 
 turned on in the driver, it will also cause 
 this message.

"General Protection Fault", 

"Exception OE", "Spool32", or "Illegal  

Operation" messages

appear.

Close all other applications, reboot 
Windows and try printing again.

"Fail To Print", "A printer 

timeout error occurred." 

messages appear.

These messages may appear during printing. 
Just keep waiting until the printer finishes 
printing. If the message appears in standby 
mode or after printing has been completed, 
check the connection and/or whether an 
error has occurred.

Содержание CLP-310N













































































































































































Отзывы:

Нет отзывов