English - 10
I
N S TA L L AT I O N
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
▼
1
Plug the incoming cable
into the “VHF/UHF”
antenna terminal on back
of the TV.
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
2
Plug the combiner into the
“VHF/UHF” terminal on
the bottom of the rear
panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
Antennas with 75-ohm Round Leads
1
Plug the antenna lead into
the “VHF/UHF”
terminal on the bottom of
the back panel.
AA68-03810A-Eng_Latin 8/18/06 10:14 AM Page 10
Содержание CL-21K40MQ
Страница 40: ...This page is intentionally left blank ...
Страница 41: ...This page is intentionally left blank ...
Страница 42: ...This page is intentionally left blank ...