2
C
HAPTER
T
WO
: I
NSTALLATION
2
.8
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
front of the TV.
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO terminal on the
front of the TV.
I
N S TA L L AT I O N
1
Locate the A/V output
jacks on the camcorder.
They are usually found
on the side or back.
Connecting a Camcorder
The front panel jacks on your TV make it easy to connect a camcorder to your TV. They
allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or
Camcorder Tape” on page 3.16)
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
01191C(E)-CHAPTER 2 10/11/05 7:22 PM Page 8
