Speaker Volume Control
LINE 3 AUDIO Setting
1
AMP Volume Control
• Connect the speaker to the speaker jack on the rear.
• The volume can be adjusted from level 20.
• When you turn the power ON, if the last volume level was over
20, the volume will be set to 20, and if it was under 20, the
volume will be set to that level.
2
H/PHONE Volume Control
• You can adjust the volume by connecting the H/PHONE to the
H/PHONE JACK on the front panel.
• The volume can be adjusted from level 31, and the AMP SPEAKER
will be muted.
• The LINE OUT AUDIO will be output continuously while the
H/PHONE is connected.
1
Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “Options”
Using the up/down and left/right buttons, move the selection cursor
to “USER SET”, then press ENTER to select.
3
Select “LINE3 AUDIO”
Move the selection arrow to “LINE3 AUDIO”, then press right to
select from the following options.
• RCA - Analog Audio input
• OPTICAL - Digital Audio input
➢
Optical(Digital Audio Input) is available for PCM and
Dolby Digital only.
MAIN MENU
USER SET
RETURN
❷
➛ ❿
ENTER
GB
64
USER SET
COLOUR SYSTEM
:AUTO
NICAM
:ON
IPC :ON
AUTO POWER OFF
:OFF
LINE3 AUDIO
:RCA
RETURN
❷
➛
RCA
OPTICAL
00096Q DVD-CHT350/XSG-GB4 11/20/03 11:50 AM Page 64
