6
GB
Installing Your Microwave Oven
Place the oven on a flat, level surface that strong enough to safely bear
the weight of the oven.
✽
Never
block the air vents as the oven may overheat and
automatically switch itself off. It will remain inoperable until it has
cooled sufficiently.
✽
For your personal safety, plug the cable into a 3-pin, 230 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
✽
Do not
install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Setting the Time
Your microwave oven has an inbuilt clock. The time can be displayed
in either the 24-hour or 12-hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
✉
Do not forget to reset the clock when you switch to and from
summer and winter time.
Checking that Your Oven is Operating Correctly
The following simple procedure enables you to check that your oven is
working correctly at all times.
First, place a bowl of water on the turntable. Then, close the door.
1.
When you install your oven, make sure there is adequate
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind, and on the sides of the oven and
20 cm (8 inches) of space above the oven and 85 cm (33
inches) of the floor.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20 cm
above
10 cm
behind
10 cm
on the side
85 cm
of the floor
1.
To display the time in the...Then press the Kitchen
Timer button...
24-hour notation
Once
12-hour notation
Twice
2.
Set the hour with the
h
button and the minutes with the
min
button.
3.
When the right time is displayed, press the
Kitchen Timer
button again to start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
1.
Press the
Power Level
button and set the time to 4-5
minutes by pressing the
1min
button the appropriate
number of times.
2.
Press
Start
button.
Result:
The oven heats the water for 4 to 5 minutes.
The water should then be boiling.
jlY`[[uT\mhTWY__ZiniUGGwG]GGm SGhGYYSGYWW\GGYaZ_Gwt
