9
GB
Power Levels and Time Variations
T he pow er level fu nction enables you to adapt the am ount of energy
dissipated and thus the tim e required to cook or reheat you r food,
according to its type and quantity. Y ou can choose betw een six pow er
levels.
T he cooking tim es given in recipes and in th is booklet correspond to the
specific pow er level indicated.
Stopping the Cooking
You can stop cooking at any time so that you can:
•
Check the food
•
Turn the food over or stir it
•
Leave it to stand
Adjusting the Cooking Time
Like traditional cooking, you may find that, depending on the food’s
characteristics or your tastes, you have to adjust the cooking times slightly.
You can:
•
Check how cooking is progressing at any time simply by
opening the door
•
Increase or decrease the remaining cooking time
Selection and Change of Weight Unit
The weight unit of this MWO is basically set in "Grams".
Power Level
Percentage
Output
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
DEFROST
LOW
100 %
67 %
50 %
33 %
20 %
11 %
900 W
600 W
450 W
300 W
180 W
100 W
If you select a...
Then the cooking time must be...
Higher power level
Lower power level
Decreased
Increased
To stop the cooking...
Then...
Temporarily
Open the door.
Result:
Cooking stops.
To resume cooking, close the door again and press
the
Start
(
) button.
Completely
Press the
Stop
(
) button.
Result:
Cooking stops.
If you wish to cancel the cooking settings, press the
Stop
(
) button again.
1.
To increase the cooking time of your food, press the
+30s
(
) button once for each 30 seconds that you wish
to add.
•
Example: To add three minutes, press the
+30s
(
)
button six times.
2.
During the cooking, to increase or decrease the cooking time
of your food, turn the
encoder dial
right or left.
1.
If you want to change the weight unit to "
Pounds
",
Press the
Select
(
) and
Deodorization
(
) buttons at the
same time for about one second.
Result:
The letters "
oz
" will appear in the display panel
and blink three times.
This means weight unit is set in "
Pounds
".
2.
To set weight unit back to "
Grams
",
Press the
Select
(
) and
Deodorization
(
) buttons at the
same time for about one second.
Result:
The letter "
g
" will appear in the display panel
and blink three times.
This means weight unit is set in "
Grams
".
jlXXWWniUGGwG`GG{ SGt GXZSGYWW[GG`aY`Ght
