er
s
d.
.
G
G
G
G
B
B
B
B
9
9
9
9
If reception is clear, you do not
have to fine-tune the channel, as
this is done automatically during
the search and store operation.
If however the signal is weak or
distorted, you may have to fine-
tune the channel manually.
➢
The fine-tuning of a stored
channel cannot be stored.
Press the MENU.
Result:
The main on-screen menu is
displayed.
Use the
▼
and
+
to display the “Setup” and
then select the “Fine tune”.
Result:
The channel number and
frequency band are displayed
above a horizontal cursor.
Use the
+
and
–
to move the fine-tuning
cursor until you obtain a sharp, clear picture
and good sound quality.
➢
If you do not press either button
within two seconds, the fine-tuning
cursor disappears and the “Setup” is
redisplayed. If this happens, reselect
the “Fine tune”.
When you have finished, press the MENU
repeatedly until the menus disappear.
F
F
F
F
ine-tuning Channel Reception
P 4 UHF
Setup
Manual store
Auto store
CH. skip
Fine tune
Sort
1
2
You can exclude the channels of
your choice from the channel scan
operation. When you scan through
the stored channels, those that you
have chosen to skip are thus not
displayed.
All channels that you do not
specifically choose to skip are
displayed during scanning.
Press the MENU.
Result:
The main on-screen menu is
displayed.
Use the
▼
and
+
to display the “Setup”.
S
S
S
S
kipping Unwanted Channels
The list displays only four channels at a time.
To display the...
Press...
Next four channels
▼
, when the selection bar is on the last channel listed.
Previous four channels
▲
, when the selection bar is on the first channel listed.
To...
Press...
The channel is...
Select the channel
▼
/
▲
Highlighted.
Erase a channel so that it will be skipped over
–
Erased.
during scanning
Add a previously erased channel so that it will be
+
Added.
displayed during scanning
When you have finished, press the MENU repeatedly until the menus disappear.
Menu
Picture
Setup
Function
Select
:
▼ ▲
Enter
:
Exit
: MENU
Setup
Manual store
Auto store
CH. skip
Fine tune
Sort
CH. skip
P 0 : Added
P 1 : Added
P 2 : Added
P 3 : Added
CH. skip
P 0 : Added
P 1 : Added
P 2 : Erased
P 3 : Added
Use the
▼
and
+
to display the “CH. skip”.
Result:
All the channels are listed in
numerical order.
1
2
3
4
AA68-00658A-Eng_0624 6/24/05 10:01 AM Page 9
