38
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level
can be used to adjust the image quality.
If this is the case, correct the degraded picture quality using
HDMI Black Level
.
―
This function is only available in
HDMI1
,
HDMI2
mode.
•
Normal
: Select this mode when there is no contrast ratio degradation.
•
Low
: Select this mode to reduce the black level and increase the white level when there is a contrast
ratio degradation.
―
HDMI Black Level
may not be compatible with some source devices.
―
The
HDMI Black Level
feature is only activated at a certain
AV
resolution, such as 720P @ 60 Hz and 1080P @
60 Hz.
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When
Eye Saver Mode
is '
On
', the blue light that wavelength is around 400nm will
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as
it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
Screen Adjustment
―
This option is only available when
PC/AV Mode
is set to
AV
.
―
This menu is only available when
Screen Size
is set to
Screen Fit
in
AV
Mode.
When a 480P or 576P or 720P or 1080P signal is input in
AV
mode and the monitor can display normally, select
Screen Fit
to adjust horizontal position in 0-6 levels.
Configuring H-Position & V-Position
H-Position
: Move the screen to the left or right.
V-Position
: Move the screen up or down.
Calibration Report
The data from this report are measured at the time of shipment.
•
The measurements may vary according to the measuring equipment, measuring location, system
environment (e.g. computer, graphic board, etc) and other variables.
•
Input signal:
HDMI
•
Each measurement from this report is based on the
Custom
mode at the time of shipment.
•
This report is not provided on the menu of some products, but in an separate hardcopy report
instead.
