Samsung BQ1AQ4T013, Руководство по обслуживанию

Страница: 11 / 53

- 9 -
Parts Explaination Photo Explaination
Door Glass
Holder Glass
Rubber
Door Bracket
Glass #1
Glass #2
Glass #3
3-5 Replacement of Door Glass (Continued)
The Assembly is reverse order of disjointing.
3-6 Replacement of the rear oven Lamp Bulb
Parts Explaination Photo Explaination
Lamp Bulb
1. Take off the cap by turning counterclockwise.
2. Remove the metal ring and the sheet ring and clean the
glass cap.
3. If necessary, replace the bulb with a 25 watt, 230 V, 300 °C
heat - resistant oven light bulb.
4. Fit the metal and the sheet ring to the glass cap.
5. Replace the glass cap.
Lamp
Glass cap
Sheet ring Metal ring
The Assembly is reverse order of disjointing.
Parts Explaination Photo Explaination
Lamp Bulb
1. To remove the glass cover, hold the lower end with one
hand, insert a flat sharp implement such as a table knife
between the glass and the frame and pop out the cover.
2. If necessary, replace the halogen bulb with a 25 ~ 40 watt,
230 V, 300 °C heat - resistant halogen oven light bulb.
Tip
Always use a cloth when handling a halogen bulb to
avoid depositing oils from your fingers on to the surface
of the bulb.
3. Replace the glass cover.
3-7 Replacement of the side Halogen Lamp (Optional)
The Assembly is reverse order of disjointing.
Side Lamp is optional, refer to specification of model.